• Powerful compact active subwoofer.
• 10″ C-CAM® driver, 200W Class-D amplifier.
• Available in two vinyl wood finishes.

Download Brochure

The Solo sub features a 300 watt amplifier and a downward firing 10″ woofer for added low frequency power and scale. It can be connected wirelessly or wired to the Solo bar. The Solo sub also can be used in association with more complex AV systems.

This is a true subwoofer, capable of producing deep and tight bass with absolute authority, and offering a level of musicality rarely found in a subwoofer at this price point.

As with all Whatmough Subwoofers, the Tornado is equally at home reproducing music or home cinema.

Available in black.

Specifications

Driver Configuration    10” cellulose fibre cone; long throw; rubber surround with a 50mm voice coil
Enclosure    Fully sealed with 25mm thick cabinet walls
Amplifier    240 watts continuous power output, Class A/B. Line and speaker level inputs. Auto on/off switch. Continuously variable volume, phase and xover frequency
Bass Extension    25Hz ± 3 dB, usable bass to below 20 Hz
Finish    Black Oak

Available in black.

Specifications

Driver Configuration    10” cellulose fibre cone; long throw; rubber surround with a 50mm voice coil
Enclosure    Fully sealed with 25mm thick cabinet walls
Amplifier    240 watts continuous power output, Class A/B. Line and speaker level inputs. Auto on/off switch. Continuously variable volume, phase and xover frequency
Bass Extension    23Hz ± 3 dB, usable bass to below 20 Hz
Dimensions (mm)    430W x 430h x 440d
Weight    22kg
Finish    Black Oak
Warranty    5 years

If you’re a visual person, you’ll love the discrete size of the Synergy 3 along with its elegant and contemporary styling. You also have the choice of three sophisticated colours: Graphite or Ivory.

So if you want a compact and contemporary speaker system that delivers exceptional sound quality, you’re going to love your new Synergy 3 speakers by Colin Whatmough.

Using the latest switch mode power conversion techniques, the W-12’s new 500 watt Class D amplifier provides enough power to control with brutal efficiency a newly designed, 12” C-CAM driver, which is equipped with a double stack (two magnet) motor system and a massive 3” voice coil.

The W-12’s rigid, sealed 25mm (1”) MDF enclosure is front-loaded firstly because it promotes the fastest, deepest bass down to 20Hz and secondly for ease of installation. Wherever you place it, top mounted controls are provided for the fine adjustment of level, turnover and other parameters at the sub. For added convenience, a 12V trigger provides power syncing with your AV receiver.

• Ultra long throw 12” C-CAM driver featuring triple suspension for ultimate linearity.
• Large 3” voice coil and double stack motor system provides high power handling and low distortion.
• Powerful 500W RMS Class-D amplifier with SMPSU able to deliver over 1000 watts peak.
• 12volt trigger – provides switching control from AV amp or processor.
• 25mm (1”) thick MDF construction
• Heavy radial cabinet bracing
• Top mounted control panel for easy access.
• Selected real wood veneer or high gloss piano finishes

Specifications

Number of Speakers: 1
Total RMS Power: 1200 Watts
Speaker Dimensions: (H x W x D) 38.7 x 37.8 x 47 cm
Woofer Size: 12” forward firing (9.7” piston diameter)
Weight: 22kg

Its bandpass design means it has much lower distortion levels than conventional sealed, ported or passive radiator designs. As a result the bass sounds cleaner and tighter and, unlike many subwoofers, the Impulse2 does not degrade the important upper bass and mid-range.

The Impulse2 uses a 250mm extremely long throw driver which has a huge 75mm voice coil for high power handling and a massive magnet structure. This driver alone weighs over 10kg. Because it has such a long throw, this driver is capable of higher output than most 305mm drivers, yet its smaller size allows it to be noticeably faster and tighter.

The Impulse2 is powered by a 240 watt class A/B amplifier is only 3db down at 25Hz and has usable bass to below 20Hz.

The Impulse2 subwoofer design acoustically rolls off at 24dB per octave above its cut off frequency of 100Hz. Total harmonic distortion is also reduced to the same extent when compared to a conventional direct radiator subwoofer whether it is sealed or vented.

This means that the Impulse2 produces much lower amounts of harmonic distortion and therefore less degradation in the upper bass and midrange frequencies than conventional subwoofers. Not only will the bass sound cleaner and tighter, the upper bass and midrange will not be adversely influenced by this subwoofer. This is particularly important in a subwoofer designed to reproduce music and not just movie sound tracks.

The Impulse2 subwoofer is even cleaner and tighter than the original Impulse. If you’re serious about performance, love your music and movies, and loath compromise, this subwoofer was made for you. It is available in two finishes – Piano Graphite (Metallic Charcoal) and Bubinga (African Rosewood).

The Impact2 uses a 250mm extremely long throw driver which has a huge 75mm huge voice coil for a higher power handling and a massive magnet structure.  This driver alone weighs over 10 kgs.  Because it has such a long throw (36mm linear throw), this driver is capable of higher output than most 305mm driver, yet its smaller size allows it to be  noticeably faster and tighter.  A true audiophile subwoofer …

Finish  -  Bubinga

• Ultra long throw 15” C-CAM® driver featuring triple suspension
• Large black anodized 3” voice coil and double stack motor system provides high power handling and low distortion
• Carefully optimized motor system design to reduce heat and improve efficiency
• Powerful 650Watt DSP Controlled amplifier (D2 Audio™*)
• Advanced full bridge switch mode power supply (SMPSU) Capable of delivering over 1200 watt peak power
• 12V trigger – provides switching control from A.V amp or processor
• Rigid, 25mm (1”) thick M.D.F construct
• Heavy radial cabinet bracing with separate amplifier partition
• Front mounted control panel for easy access and viewing
• The LEO™*  system provides Automatic Room Mode Correction (ARMC) for easy set up and perfect sound quality
• Remote control with 4 user EQ settings
• Selected real wood veneer or high gloss piano finishes

*LEOTM and Listening Environment OptimizerTM are Trade Marks of D2Audio®.
LEOTM and D2Audio are Registered Trademarks of Intersil Corporation.