• Acoustically matched with all other Bronze Series loudspeakers for excellent surround sound imaging and consistent timbre.
• Switchable dual-mode design for direct or ambient sound.
• New C-CAM^® tweeter has greater sensitivity and a wider bandwidth beyond 30kHz.
• New C-CAM^® bass and mid-range drivers refined by FEA analysis.
• Single bolt-through drivers.  A design feature which means the driver is not fixed to the front baffle and cannot transmit vibrations and therefore colouration to the cabinet.
• Improved cabinet rigidity and stability.
• High-quality terminal panels blend easy access with high-end functionality.
• Choice of two high quality vinyl wood finishes.

Download Brochure

If you’re a visual person, you’ll love the discrete size of the Synergy 3 along with its elegant and contemporary styling. You also have the choice of three sophisticated colours: Graphite or Ivory.

So if you want a compact and contemporary speaker system that delivers exceptional sound quality, you’re going to love your new Synergy 3 speakers by Colin Whatmough.

• Flush to wall placement, with recessed termination.
• Drivers match with other FX loudspeakers for consistent timbre and consistency.
• Dual di-pole/ bi-pole modes easily selected by switch operation.
• New C-CAM® tweeter design with damped rear chamber, providing improved clarity and wider operating range to make better use of HD audio formats
• Single 6” C-CAM® bass/mid-range driver incorporating RST® technology, for better damping and improved mid-range clarity.
• Selected premium quality wood veneers or high gloss piano finishes.
• Acoustically matched with all other FX speakers for excellent imaging and consistency of timbre in surround applications.

Configuration   -  Two-way bass reflex enclosure using 0ne 140mm cellulous fibre Bass/mid driver and a 35mm dual concentric tweeter which uses a wave guide centre plug.
Nominal Impedance  -   4 ohms
Amplifier Power Requirement  -  Approximately 40 – 100 Watts
Power Handling  -  Transient levels in excess of 100 watts. Average levels of 40 watts.
Sensitivity  -  85dB input level of 2.83 Volts (1 Watt into 8ohms)
Frequency Response  -   80Hz – 40kHz ±3dB
Dimensions  -  300H X 190W X 180D
Weight  -  6kg each
Finish  -  Graphite (Metallic duco)
Warranty  -   5 Years

The editor of Pro Audio Review wrote:

“An excellent imaging speaker system, the Studio HDs are impressive in the amount of information they convey. On 24 bit/96kHz recordings, the Studio HDs sound very natural with accurate presence and imaging deep and wide. The bass also appeared more accurate than my original Studios. The transient response is quite good; cymbals reflect the speed and air of a well recorded setup, without a hint of harshness… just like it sounds in the session.

My listening notes contained the word “accurate” over and over. As for negatives with the Studio HDs, I simply found none. They sound great, look good, and are easy to place.” – John Gatski, PAR

Specifications:

Download Brochure

In monopole mode for discrete side or rear sound channels, its front-firing 6.5” RST bass/mid driver and C-CAM ribbon transducer deliver accurate ultra-wideband sound to match the tonal balance of any Gold Series speaker combination. In dipole mode the FX uses two pairs of side firing 4” C-CAM bass/mid drivers and 1” C-CAM gold-dome tweeters, combined with the tailored output from the front-firing bass/mid driver to provide wonderfully diffuse yet tonally precise surround effects. The FX can be flush-mounted on side or rear walls. Installation is made easy by the inclusion of an adjustable bracket, which allows levelling and adjustment prior to fixing.

• New C-CAM® ribbon transducer design – providing extension to a class leading 60KHz
• Single bolt through driver fixings for improved bracing, rigidity and driver/baffle de-coupling
• Die-cast alloy terminal panel arrangement with high quality bi-wire terminals and high end spade type link cables
• Pureflow® Silver internal cabling
• Selected premium quality wood veneers or high gloss piano finishes.
• Rigid 20mm MDF construction throughout, employing radial and cross-bracing techniques for high rigidity resulting in low cabinet colouration

Download Brochure

On-wall speakers are often dynamically challenged, especially in the lower octaves. This isn’t the case with the Legacy Silhouette. It provides top-to-bottom performance with plenty of slam. The three-way design features a newly engineered 10″ low-profile long-excursion woofer and pneumatically coupled radiator to lay the foundation supporting the high acceleration 7″ silver/graphite midrange. Treble remains clear and airy from the 4″ Legacy AMT ribbon, boasting a high-temperature pleated Kapton diaphragm and neodymium motor.

The internal crossover divides the spectrum precisely where the wall boundary creates a strong dip in the response of conventional speakers. This compensation in the electrical network allows for the appropriate response at the listening position. The result is a speaker that does not sound like an on-wall with staging beyond the wall.

Specifications:

Download Brochure