• New C-CAM® tweeter design with damped rear chamber, providing improved clarity and wider operating range for HD audio formats
• New 6” C-CAM® bass and bass/ mid-range drivers incorporate RST® technology, for better damping and improved mid-range clarity.
• New cast polymer bass chassis design for better rigidity and lower reflection properties.
• Dual Chamber Bass Reflex with Differential Tuning.
• HiVe®II port technology for better transient response and tighter bass.
• Single bolt through driver system, for increased overall bracing and rigidity.
• Rigid 19mm MDF construction throughout, employing radial and cross-bracing techniques for high rigidity resulting in low cabinet colouration.
• Floor level terminal location for easy access and neat cable routing
• Invisible magnetic grille fixing provides clean visual styling when used with the grille off.
• Selected premium quality wood veneers or high gloss piano finishes.

Specifications:

• Dimensions (W x H x D): 420 x 166 x 330 mm
• Weight: 20.3kg
• Nominal output power: 2 x 35 watts RMS
• Frequency response: 20 Hz-20 kHz, THD < 1.0%, 4 ohm; 20 Hz-20 kHz, THD < 1.0%, 8 ohm
• CD/Tuner/Aux/Tape: 5 Hz-70 kHz (-3 dB) 20 Hz-20 kHz (-0.5 dB); Phono: 20 Hz-20 kHz (-1.0 dB)
• Signal to noise ratio: CD/Tuner/Aux/Tape 100 dB; Phono 80 dB
• Input sensitivity: CD/Tuner/Aux/Tape 300 mV/25 kohm; Phono 5 mV/47 kohm
• Mains voltage: 230 VAC / 50 Hz
• Max. power consumption: 250 w
• Tubes Used: Phono input stage: 4 x 12AX7 (ECC83); Pre-amp: 2 x 12AX7 (ECC83); Inverter stage: 2 x 12AU7 (ECC82); Power stage: 4 x EL34.

Arcam’s thirty five years of audio engineering experience is all wrapped up in the D33, which benefits from critically damped, low resonance casework, massive power regulation plus extensive low-noise sub-regulation. The Arcam team’s attention to detail has even delivered an incredibly low 0.5w standby power consumption and duplex RS232 control interface for custom installation. We believe the performance of the D33 SuperDAC will set a new benchmark.

Specifications:

Analogue Audio Output

• Conversion 2x Burr Brown 24-bit 192kHz Advanced Segment Delta-Sigma
• Signal to noise ratio > 110dB CCIR (unweighted)
• Harmonic distortion (1kHz) 0.0008% (20Hz — 20kHz, unweighted)
• Frequency response (+0.1dB, -0.5dB) 10Hz–20kHz
• Filtering User selectable, fast or slow roll-off
• Output level (0dB) 2.2Vrms
• Output impedance 47?
• Minimum load 5k?

Digital interfaces

• USB Class 1 electrically-isolated USB 1.1
• Class 2 USB 2.0 High Speed (480 Mbit/s)
• AES/EBU Up to 192kHz sample rate
• Coaxial S/PDIF x 2 Up to 192kHz sample rate
• Optical S/PDIF (TOSLINK) x 2 Up to 96kHz sample rate Computer compatibility
• PC Windows 7, Vista & XP (driver required for 24/192 material)
• MAC OSX (no driver required)

Physical

• Dimensions W433 x D370 x H110mm
• Weight 6.2kg nett/10.0kg packed
• Power consumption 30W maximum
• Analogue output connection RCA Phono x 2, Balanced XLR x2

Supplied accessories

• Included Mains lead, CR107 remote control, 2 x AAA batteries

Dimensions:

Height: 870mm

Width: 1630mm

Depth: 600mm

Dipolar loudspeakers have existed for many years; most of them have been electrostatic designs. However, electrostatic technology has one significant drawback: bass frequency reproduction is often compromised. They simply aren’t able to produce the characteristic physical bass ‘thwack’ you feel in your midriff. The Jamo Reference R 907 audio tower uses electrodynamic speakers instead of electrostatics and the results are amazing. The exceptionally firm, deep bass and concert-like high end dynamics put you in the middle of the soundstage.

The revolutionary Jamo R 907 floor-standing dipolar loudspeaker is packed with high-performance features:

The revolutionary Jamo R 907 floor-standing dipolar loudspeaker is packed with high-performance features:

• Two 12-inch woofers,
• A 5.5-inch midrange driver
• one-inch tweeter/li>
• A beautiful high-gloss baffle, with unique multi-ply construction<

No other high end loudspeaker sounds or looks quite like it.

The R 907 is the perfect match for the highest quality amplifiers on the market. However, with 89dB sensitivity and very stable load at 4 ohms, it doesn’t need huge power to drive it’although it will handle up to 500 watts of peak power. The open design and drivers reproduce wonderfully transparent vocals and a response so dynamic that it’s hard to believe you’re listening to a speaker. The exceptionally firm bass provides excellent transient speed, precision and fluidity throughout the frequency range with no colouration or reverberation. Like our flagship R 909, the Jamo Reference R 907 makes music come alive in ways you’ve never experienced before.

Technology

A smaller, more affordable version of the Jamo R 909, the new R 907 tower speaker is similarly designed for the true audiophile but designed to work in situations where space is at a premium. Like the R 909, the R 907 features dipolar engineering, which means that the sound is distributed from both the front and the back of the speaker. The reflected sound from the rear adds ambience and gives the impression of a much larger room in other words, a more lifelike live performance sound. By using dual 12-inch woofers, rather than the 15-inch drivers found in the R 909, Jamo engineers were able to make the R 907 shorter and slimmer than the larger model, making it ideal for smaller living spaces.

Available in striking high-gloss red or black finishes, the R 907 is sure to attract attention not only for its unique design, but for its incredibly detailed sound reproduction. The open design also allows you to see the quality components that make the Jamo R 907 so remarkable: two 12-inch woofers, the Hard Conical Cone midrange driver and the premium tweeter. From deep, precise bass to startlingly concert-like vocals, we’ve spared no expense to deliver sound in its purest form.

The Jamo development team was given a mission: to “translate” the design and the acoustic characteristics of the R 909 into a new, less space-demanding speaker. Jamo R 907 achieves that mission brilliantly. Like its bigger brother, the R 907′s sound quality is very open and dynamic with extremely low distortion throughout the entire range. It features a highly-detailed midrange with optimal voice reproduction, and a firm, powerful precise bass, unmatched by mass-produced dipolar speakers. The Reference Series offers beautifully shaped sculptures with superior power handling and sound. With their refined sound they are, without a doubt, designed exclusively for the increasing number of people who prefer high end speakers that deliver perfect two-channel sound.

love it, share it!

facebook twitter google pinterest bookmark

Download Brochure

Nordost Odin Supreme Reference Power Cord - The Odin Power Cord applies Nordost’s latest TSC (Total Signal Control) technology to significantly advance the audio performance AC wiring. It uses six close tolerance 16AWG, 99.99999% oxygen free copper conductors, each covered by an 85 micron layer of extruded silver, suspended in a dual micro mono-filament matrix and enclosed in the TSC shield. The result is a new level of power transmission efficiency coupled to superb mechanical damping and rejection of external RFI/EM interference. The separate, solid-core conductors eliminate strand interaction, hot spots and other artifacts that can degrade performance, while the extreme precision with which the TSC tubes are manufactured and arranged ensures complete consistency in performance. Let Odin feed your system and get ready for improved noise floor and resolution, increased transparency, dynamic range and freedom from grain, more believable sound staging, more natural life and musical dynamics, a breathtaking range of tonal colours. Suddenly the music will step away from the system producing it, taking on a life of its own, becoming a real performance – all because the power on which your system depends is cleaner and arriving quicker.

Nordost Odin Supreme Reference Analog Interconnect – The Odin Supreme Reference Interconnect uses eight of our revolutionary Total Signal Control (TSC) tubes – each carrying a 23 AWG Dual Mono-Filament conductor with 85 microns of extruded silver over 99.999999% oxygen free copper. The eight conductors are precisely wound in a spiral pattern around a central spacer, which contains two extruded silver over OFC drain wires to create a cable of unprecedented consistency and geometrical precision. The result is perfect shielding yet manageable flexibility. Odin Interconnect cables are either offered with a special oversized 10 mm WBT NextGen silver-plated, copper RCA connector or a specially machined rhodium-plated Furutech XLR connector for balanced operation. These connectors offer a low-mass design that reduces eddy currents and produces the best available interface and impedance matching between the cable and the attached components.

Specifications:

Insulation: High purity class 1.003 extruded Fluorinated Ethylene Propylene (FEP)
Construction: Mechanically tuned lay, length and Dual Mono-Filament, TSC design
Conductors: 8 x 23 AWG
Material: Silver-plated 99.999999% solid core OFC
Capacitance: 19.0pF/ft
Inductance: 0.07?H/ft
Overall Shield Coverage: 100% Individually shielded total coverage
Velocity of Propagation: 90%
Termination: Furutech rhodium-plated XLR